S-SWH-F 500/30

Model
  • polyethylene container with 135 litres capacity and up to 75 litres switching volume
  • with submersible waste water pump S-ZPK with float switch
  • high-quality, silicon carbide mechanical seal, stainless steel motor housing (1.4404), stainless steelmotor shaft
  • piping made of PVC with external non-return valves and pressure outlet 1 ¼“ FPT
  • operation temperature 40°C (short-term 90°C)
  • protection grade IP 57 - temporary submersible
Application
  • for pumping slightly acidic condensate, aggressive or saline media (max. 15% salt content)
  • as a lifting system downstream of grease separators (according to DIN 4040-100 only in a version with 30 mm grain size)
  • pumping of domestic waste water from washing machines, showers, washbasins etc.
  •  above-ground installation in frost-free rooms below the backflow level
Scope of delivery
  • pre-assembled ready for connection with 3 m power cable and plug
  • pressure outlet incl. non-return valve(s) and gate valve
  • incl. float switch
Application: Disposal
Frequency: 50
Head up to [m]: 7.5
Installation location: inside buildings
Max. flow rate [m³/h]: 7.0
Max. temperature [°C]: 40 (kurzzeitig 90)
Power P1 [W]: 300
Power P2 [W]: 130
Pumped medium: condensate, waste water
Solids handling [mm]: 10
Speed [U/min]: 2800
Voltage [V]: 230
Manual

Data sheet

Contact