Microboy Pro
Microboy Pro
Product number:
18190
Microboy Pro
Product number:
18190
- Macerator with high-performance cutting system
- Connection of floor-standing WC
- Max. flow rate: 7,5 m³/h
- Max. head: 11,8 m
- Input power P1: 600 W
- Output power P2: 350 W
- Pressure outlet: 1 1/4" internal thread
Model
- reduced noise during cutting
- adjustable cutting gap for permanently optimal cutting results
- optimized cutting system made of corrosion-resistant special steel 1.4112 with special hardness, wear resistance and cutting performance
- terpolymer container for direct connection to EURO-Toilets with minimum inlet height
- 4 additional lateral inlets DN 40 for connection of washbasin, shower or bidet
- container ventilation via active carbon filter
- robust, dry installed vortex pump with stainless steel cutting system
- alarm signal in case of fault
- emergency discharge possible via motor shaft with slot
- pressure outlet 1 ¼“ IG with integrated non-return valve, optionally left or right
- operation temperature max. 40°C
- protection grade IP 54 - protected against splashing water
Application
- cuts wipes and female hygiene products
- particularly suitable for publicly accessible sanitary facilities
- single-toilet lifting unit for restricted domestic use according to EN 1825-3 below the backflow level e.g. in cellars or for the refurbishment of old buildings
Scope of delivery
- pre-assembled ready for connection with 1,5 m power cable and plug audible alarm included
| Application: | Disposal |
|---|---|
| Features: | mit pneumatischer Pumpensteuerung für Einzelpumpen |
| Frequency: | 50 |
| Head up to [m]: | 11.8 |
| Installation location: | inside buildings |
| Max. flow rate [m³/h]: | 7.5 |
| Max. temperature [°C]: | 40 (kurzzeitig 90) |
| Nominal current [A]: | 2.5 |
| Packing (WxHxL): | 300 x 300 x 490 |
| Power P1 [W]: | 600 |
| Power P2 [W]: | 350 |
| Pumped medium: | sewage containing faeces, waste water |
| Speed [U/min]: | 2800 |
| Voltage [V]: | 230 |
| C [µF]: | 10 |
